ENGLISH

  嶄猟

Home Amplifier Speaker Exhibition Visit Staff Contact Us
 
AMPLIFIER SPEAKER
 

PS-8 DN Intelligence Sequence Power

 

Feature
     1 8 Channel control with 16A relay, metch internation standred.
     2 10 bit A/D convertor for load power detection.
     3 Can be turned ON/OFF separately by sequence for music system.
     4 Over load warring and cut off the channel.
     5 Can control every channel ON/OFF by standred RS232 serial port.
     6 10 LED display the power of load.
     7 Can show and record work state of each channel .
     8 Can connected 8 PS-8DN at the same time.
When the sequence Power Switch on, You can use the computer to turn ON and turn OFF any one of the power output promptly online ,So to deal with the sudden fault of the equipment.
PS-8 DN is very convenient to be used when more one PS-8DN link. You only need to connect the PS-8DN one by one with the RS232 Data control cable. After connected , the microchip in PS-8DN that can receive the command from extend computer for intelligence control. For example, 10 bit A/D load power detect. If over load can auto cut off this channel but not disturb other channel work continue.10 LED indicat for each channel power volume. Can connected 8 PS-8DN at the same time.
  Description
1.8 channel power output with relay control from the microchip.
2.Each channel 2200W 220V 50Hz.
3.Link allow up to eight PS-8DN device with RS232 data cord.
4.Control voltage DC 12V for circuit in it.
5.Output connectors use U.S.A. standard three wire AC connect.
6.Power source :220V 50Hz standard three wire,Grounded wire is needed.
7.Dimension :485mmX190mmX50mm
8.Gross weight: 4 Kg


Back side decription:

A. Power output connector
B. Power cord
C. RS232 female socket
D. RS232 male socket

  LED state indication
Use 10 led indictors for one channel.
    1 Led 1 for power source indicator.
    2 Led 2 for work indicator.
    3 Led 3 for output power indication(valume:1-250W)
    4 Led 4 for output power indication(valume:251-500W)
    5 Led 5 for output power indication(valume:501-750W)
    6 Led 6 for output power indication(valume:751-1000W)
    7 Led 7 for output power indication(valume:1001-1250W)
    8 Led 8 for output power indication(valume:1251-1500W)
    9 Led 9 for output power indication(valume:1501-1750W)
    10 Led 10 for output power indication(valume:1751-2000W)
    11 At the same time, led 10 is for over load indicator warning.
 

UPD-8 Intelligence Sequence Power

   

 

 

 

         UPD-8 with RS232 or PS2 ports and support central control
The sequence power controller suited for audio system, computer, TV broadcast and other equipment. It can prevent sound system from over current and prevent electrified wire netting from electrical equipment.

         When the switch on, the controller can connect the power of all output sockets in proper order. When the switch  off, the controller can cut the power of all output sockets in contrary order.

         When the BYPASS switch off, every channel can independence control by the switchs (CH1 to CH8), if the BYPASS switch off, all output according to pre set.

         Back side decription:
A. Power output connector
B. Power cord
C. PS 2 female socket

 

 

 

         When more sequence power controllers are used in a system, you can use option parts that the data cord connect between them.

         When the appliance is over 8 channels and less 16 channels, two UPD-8 machine is needed.

         When the appliance is over 16 channels and less 24 channels, three UPD-8 machine is needed, and so forth.

         USB ports for the option parts USB LED light up your audio system.

         Independent eight channels control mode with CPU .

         Can uaed it in central control system by a RS 232 series port or PS 2 port for long distance control the sequence power on/off and standby mode.

         Build in a high sensitivity CPU for good quality guarantee in design.   

  ¢ Control power : 8 channels (connect    2000W*n channel power, n=1,2,3´)
¢ Time-lapse(per channel) : 2 seconds
¢ Gross weight: 6.7 Kg 
 

¢ Rated output voltage :   AC 220V, 50-60Hz
¢ Rated output current(per channel) : 25A
¢ Dimension :552mmX442mmX78mm
¢ Net weight5.7Kg 

       
UHL series LCD AMP.
G series KTV AMP.
UA series KTV AMP.
UK series POWER AMP
Mseries POWER AMP.
UM series POWER AMP.
H series POWER AMP.
Fseries POWER AMP.
Cseries POWER AMP.
US series POWER AMP.
Useries POWER AMP.
ARROW-D SP AMPLIFIER
ARROW-D DP AMPLIFIER
B series SUB WOOFER
UB series SUB WOOFER
DSP EFFECT PROCESSOR
PS series DELAY POWER
MS TV MEETING SYSTEM
 
 
 
 
 
 
 
 
 

  LINK:

         
BJ-USOUND MARKETING PY-USOUND  IT NET GZ-SOUND PCONLINE
CITYSAFE SPEAKER  AUDIOSOUTHCHINA EASONAUDIO ZS-SOUND STOCK

Emailusound@126.com

Usound Audio Equipment Manufactory

Copyright 1998-2012 Usound International

Tel:020-84669973,020-84804183 020-61920638 Fax:020-61920639 ext 803